FUEL FILTER HEATING
Band heaters
FUEL LINE HEATING
Flow-type in-line heaters
Flexible tape heaters
ÝÍÃË-1 12Â
ÝÍÃË-1 24Â
FUEL TANK HEATING
Heated fuel standpipes
Heated fuel standpipe nozzles
FILTER-SEPARATOR HEATING
Fleetguard FuelPro FH230 and DieselPro FH232 systems
Mann-Hummel PreLine 270 and PreLine420 systems
INTEGRATED HEATING
Automated heating systems
|
|
|
 |
Flexible tape heaters ÝÍÃË-1 are intended for external heat-insulation and electrical heating of the fuel engine line elements (fuel lines, filters’ and filter-separators’ bodies, fuel tank) as well as seats and other vehicle elements exposed to freezing under low temperature conditions. The heaters can be implemented for pre-heating and propulsion heating of the fuel equipment. Polymeric material of the heater is resistant to aggressive media, diesel fuel, solvents and retains flexibility under low temperature (down to -60°C).
|
The heater ÝÍÃË-1 is laid along the fuel main line, clenched and fixed by plastic clamps or sticky interconnect tape. Efficient warming is provided by close contact of the heater surface and fuel line surface as well as by additional external heat-insulation. The heater is universal for its adjustment to any vehicle with the 12 and 24 V power-supply voltage of the car system.
The heaters ÝÍÃË-1 have manual heating control and enter to the automatic heating control system ÑÏÀ-101 (201). Flexible heaters can replace band heaters ÏÁ-101 and flow-type heaters ÏÏ-101 (102) in the fuel heating system. In the case of manual control the heater is connected to the power-supply system, and switch with indication is mounted in the cabin within visibility zone from the driver's seat. The switching-on of the heater is conducted by pressing the button of the switch.
Main technical specifications
of the flexible tape heaters ÝÍÃË-1 12Â (24Â) |
| Description |
Type |
| ÝÍÃË-1 12Â |
ÝÍÃË-1 24Â |
| DC power-supply voltage, V |
12 |
24 |
| Length, m |
1 / 2 /4 |
| Profile dimensions (width õ thickness), mm |
24 õ 3,3 |
Nominal electric power, W, at a length of the heater, m
1
2
4
|
30
60
120 |
30
60
120 |
| Heating element maximum temperature, °Ñ |
180 |
| Heating control |
Manual, automatic at connection to the ÑÏÀ |
The delivery set includes:
packed heater, wiring kit for connection to the power-supply system or to the ÑÏÀ, certificate, installation and maintenance manual.
Ordering model designation:
Flexible tape heater
ÝÍÃË-1/L-1 24Â
where ÝÍÃË-1 – model designation;
/L – heater length;
- 1 – wiring kit for manual control, or -2 – wiring kit for connection to the ÑÏÀ;
24Â – power-supply system voltage, V
|
